Variable Gain Amplifier Product Features * Multi-chip hybrid module * MESFET&HBT chip on board * 2 stage Gain Block amplifier Which includes a digital attenuator * 6-bit RF digital step attenuator covering a 31.5dB attenuation range in 0.5dB steps * Module system simplification * No External Matching Circuit Needed * Cutom Design Available * Alumina Substrate * Pb Free / RoHS Compliant 2AM Series Application * Repeater * Base Station * RF Sub-Systems * IMT, WCDMA, UMTS, Wimax, Wibro Package : CP-5CS Description Variable Gain Amplifier 2AM Series can be used in any applications that need Gain Control according to Input Signal Level. Also, 2AM Series can be applied to various frequency system combined with GaAs MESFET or InGaP HBT MMIC. 2AM series are a hybrid module which has 2-stage Amplifier chip and Attenuator chip mounted on a Ceramic board. Attenuator is 0.5dB step 6-bit digital attenuator which has 31.5dB of total attenuation. Original version use GaAs MESFET amplifiers but RFHIC can customize the amplifier IC used in the hybrid to be either HBT, E-pHEMT or any other technology depending on specification requirements. Electrical Specifications Part Number 2AM0405S 2AM0905S 2AM2105S 2AM0921S 2AM2121S Frequency (MHz) 50~200 824~960 1920~2170 400~1500 1700~2300 Gain (dB) 28 25 17 25.5 22 NF (dB) 3 3 3 6 6 P1dB (dBm) 21 21 21 21 21 OIP3 (dBm) 39 39 39 39 39 Vd (V) 5 5 5 5 5 Id (mA) 240 240 240 190 190 * 50 RF Digital Attenuator insertion. 6-bit Flexible serial programming interfaces Absolute Maximum Ratings PARAMETER Operating Case Temperature () Storage Temperature () Supply Voltage (V) Rating -40 ~ +85 -40 ~ +150 +6 Remark Functional Diagram Tel : 82-31-250-5011 rfsales@rfhic.com Page 1/9 All specifications may change without notice. Version 1.2 Variable Gain Amplifier <2AM2121S RF data> 2AM Series
|